Online Store

What is a Tantalum Capacitor? Tantalum capacitors are electrolytic capacitors that use tantalum metal for the anode. They are polarized capacitors with superior frequency and stability characteristics. What makes tantalum capacitors unique is the usage of tantalum for the anode of the device. This anode is set up as one chunk of material inside of the case, which is very different from the layering style used in MLCC capacitors where the material is sandwiched on itself and then capped on the ends. Using tantalum results in a very thin dielectric layer, resulting in a higher capacitance per volume and allowing for smaller capacitors that can still meet the needs of modern systems. In addition to the nice gain in capacitance per volume, the tantalum capacitors also have very low ESR or Equivalent Series Resistance reducing system losses. A downside of low ESR is that it may be too low to achieve stability in power supply regulators, which needs to be taken into account. Why Us...

switching regulator  A voltage controller that uses a changing component to change the supply into a rotating current, which is then changed over to an alternate voltage utilizing capacitors, inductors, and different components, at that point changed over back to DC. The circuit incorporates guideline and separating parts to safeguard an unfaltering yield. Switching regulators or DC-DC converters are used universally in almost all electronic devices. They are popular as they have high efficiency during both step up (boost converter) and step down (buck converter) of DC voltage. Below may be a simplified diagram of a buck convertor that is used to step down DC voltage. A controller IC is needed to sense the feedback voltage and alter the switching PWM consequently. Some DC-DC converters today replace the diode with a transistor for synchronous rectification for higher efficiency. This efficiency comes at a higher cost as a more complex driver is needed. How does a sw...

Potentiometers A potentiometer is simply a variable resistor that can be controlled by the user. Potentiometers accomplish this by having three terminal resistors forming and a load that connect the potentiometer and the voltage source in one loop and the potentiometer and the load in another. Potentiometers have a wide range of uses, ranging from CD players to Servo mechanisms. How Does a Potentiometer Work? A potentiometer has 3 pins. Two terminals (the blue and green) are connected to a resistive element and the third terminal (the black one) is connected to an adjustable wiper. The potentiometer will work as a rheostat (variable resistor) or as a voltage divider. Rheostat To use the potentiometer as a rheostat, only two pins are used: one outside pin and the center pin. The position of the wiper determines what quantity resistance the potentiometer is imposing to the circuit, as the figure demonstrates: If we have a 10kΩ potentiometer, it means that the maximu...

A tantalum electrolytic capacitor is AN electrolytic capacitor, a passive part of electronic circuits. It consists of a pellet of tantalum metal as AN anode, lined by AN insulating compound layer that forms the nonconductor, enclosed by liquid or solid solution as a cathode. About Tantalum Capacitor Tantalum Capacitors are utilized in electronic devices together with moveable telephones, pagers, personal computers, and automotive electronics. When choosing between accessible tantalum Capacitors, there ar variety of key specifications to stay in mind once planning during a tantalum capacitor. These embrace capacitance price, capacitance tolerance, dissipation issue, leakage current, and equivalent series resistance (ESR). The designer should additionally think about the board interface needs. Tecate tantalum capacitors ar out there in radial leaded or surface mount configurations. Capacitance may be a live of the energy storage ability of a tantalum capacitor, given as C = K ...